LeafGuard Seamless Gutter Machine
leafguard_mini
Part # 01317A

The majority of debris, such as leaves, twigs, pinecones, etc., that land in a traditional open top gutter is wind-blown. They usually clog up the gutter, necessitating periodic cleaning and maintenance.


Englert LeafGuard’s shield design sheds the leaves and twigs, while propelling all the water coming down the roof into the gutter trough, following the contour of the curved hood; it keeps the gutters clean and flowing so you don’t have to clean them.


The LeafGuard machine produces approximately 40 feet of covered gutter material per minute. It forms the unique, one-piece hooded gutter system out of .032 aluminum. The LeafGuard roll-forming machine requires a larger truck than the conventional gutter machines.

Features

  • Englert LeafGuard utilizes readily available gutter components such as leaders, elbows, outlets, etc. However, certain accessories are unique to Englert.
  • Hangers (brackets), end-caps, inside and outside miters, and straps.
  • Englert LeafGuard features a shield, back support wall and a trough, all integrally designed as one piece. The shield comprises of a continuous double convolute curve, extending from the back wall into the trough inside.
  • The Gutter System is fastened to the structure (fascia) by specially designed brackets (support system) securing the back wall.
leafguard
Technical Data
  • Length – 21 ft. 3 in.
  • Width – 3 ft. 2 in.
  • Height – 5 ft. 2 in.
 Power
  • 1.5 HP, 115V, single phase
Shear
  • Mechanical guillotine using a double rack and pinion system.
 Speed
  • Approximately 40 feet per minute.
Controls
  • Forward and reversing drum switch with Entry and Exit end E-stop switches.
 Maximum Gauge of Materials Formed
  • Aluminum – 0.032”.
  • Copper – 20 oz. ¾ hard

NOTE: Englert LeafGuard is only available through licensed dealers. Only licensed dealers are authorized to purchase this equipment.