MetalMan Fixed Panel FP1000/16
machine_mini
Part #
The MetalMan FP1000/16 Series Panel Machine runs a fixed width, variable length, single-profile 1.5 in. (38.1mm) high x 1/4 in. (6.4 mm) wide snap-lock panel configuration with a 16 in. (490.4mm) coverage.

Features

  • Separate drive roller systems designed to eliminate most oil canning
  • Polyurethane drive rollers
  • Chrome plated forming roller system
  • Dual emergency stop switches at entry and exit ends of machine
  • Easy to operate manual hand sheer
  • Two pairs of 1 inch adjustable flat rib rollers
  • One 3000 lb. capacity expandable arbor with stand
  • Clip relief rollers
  • Comes complete with a run out limit switch.

Available Options

  • Dual reel rack for extra expandable arbor
  • 10 ft. sections of variable height run out stands
  • Hand seamer A1300 (90° or 180°)
  • Electric seamer
  • Pencil rib rollers (3/8 in. and 5/8 in. wide)
  • Striation rollers
machine
Panel Image

1 ½” Snap-Lock Metal Roof System

View
Technical Data
  • Length – 123 in. (3.13m)
  • Width – 31.5 in. (.8m) / 36-1/2 in. (.93m) with rack.
  • Height – 29 in. (.75m) / 53 in. (1.35m) with rack.
  • Weight – Approximately 1,500 lbs. (681.8 kg)
 Power
  • 1.5 HP electric motor 120V/20AMP.
Drive
  • 4 polyurethane drive roller stations, chain driven.
 Shear
  • Easy cut rack and pinion manual hand shear.
Speed
  • Approximately 40 ft. (12.18m) per minute.
 Materials Formed
  • Steel – 30 gauge to 24 gauge. (painted, galvanized, aluminized)
  • Aluminum – .019" (.48 mm) to .032" (1.02 mm)
  • Copper – 16 oz. to 20 oz.