MetalMan Fixed Panel FP1101/20
machine_mini
Part #
Introducing the MetalMan FP1101/20 Series Panel Machine which runs a fixed width, variable length, single-profile 1 in. (38.1mm) high, nail strip Snap-Lock panel configuration with a 20 in. (406.4mm) coverage.

Features

  • Separate drive roller systems designed to eliminate most oil canning.
  • Polyurethane drive rollers.
  • Chrome plated forming roller system.
  • Dual emergency stop switches at entry and exit ends of machine.
  • Easy to operate manual hand sheer.
  • Two pairs of 1 in. adjustable flat rib rollers.
  • One 3000 lb. capacity expandable arbor with stand.
  • Clip relief rollers.
  • Comes complete with a run out limit switch.

Available Options

  • Dual reel rack for extra expandable arbor.
  • 10 ft. sections of variable height run out stands.
  • Pencil rib rollers (3/8 in. and 5/8 in. wide).
  • Striation rollers.
machine
Panel Image

1” Integral Snap-Lock Metal Roof System

View
Technical Data
  • Length – 123 in. (3.13m)
  • Width – 35.5 in. (.8m) / 40.5 in. (.93m) with rack.
  • Height – 29 in. (.75m) / 53 in. (1.35m) with rack.
  • Weight – Approximately 1,500 lbs. (681.8 kg)
 Power
  • 1.5 HP electric motor 120V/20AMP.
Drive
  • 4 polyurethane drive roller stations, chain driven.
 Shear
  • Easy cut rack and pinion manual hand shear.
Speed
  • Approximately 40 ft. (12.18m) per minute.
 Materials Formed
  • Steel – 30 gauge to 24 gauge. (painted, galvanized, aluminized)
  • Aluminum – .019" (.48 mm) to .032" (1.02 mm)
  • Copper – 16 oz.