Roof Panel Curving Machine
The Englert 1300 and 1301 roofing panel curving machine can be brought down to minimum radii that range between 24 inch to 36 inch in aluminum, and 60 inch to 100 inch in steel. This system requires a solid deck for installation, and carries the 1300 UL listing (16 inch width) with proper fastening.
Both the 1 inch and 1½ inch panel profiles can be locked with a 90° fold or a slim 180° fold. Panel widths for this application are infinitely adjustable from 12" to 28" in all metals and seam configurations.
Part # 01607F
Machine Technical Specs
Specs
- Length – 39.5" (100.33 cm).
- Width – 45" (114.30 cm).
- Height – 64.9" (164.85 cm).
- Weight – 617.4 lbs (280.05 kg).
Speed
- Approximately 40 ft. (12.19 m) / minute.
Minimum Radius 1 ½"
- Steel - (24 ga) - 100" (254 cm).
- Copper - 36" (91.44 cm).
- Aluminum - 36" (91.44 cm).
Minimum Radius 1"
- Steel - (24 ga) - 60" (152.4 cm).
- Copper - 24" (60.96 cm).
- Aluminum - 24" (60.96 cm).
Electrical Requirements
- 115 Volt, single phase, 1.0 HP AC Motor.
Material Formed
- Steel - 29 gauge to 22 gauge (painted, galvanized, aluminized)
- Aluminum - .019" (.48 mm) to .040" (1.02 mm)
- Copper - 16 oz., 20 oz. 3/4 hard
Catalogs & Brochures
Related Products
