2" Panel Curving Machine
01607Amini
Part # 01607A

The curved 2400 system, at 2" tall, can be brought down to a minimum radius of 36" in aluminum, or 100" in steel. This system, although rugged in design, requires a solid deck for installation, and carries the 2400 UL listing (18" width) with proper fastening.


The 2” profiles can be locked with a 90° fold. Panel widths for this application are infinitely adjustable from 12" to 28" in all metals and seam configurations. This system curves and seams panels formed on Englert roll formers (Model 2400 only).Curves and seams panels formed on Englert roll formers (Model 2400 only).
01607A
Technical Data
  • Length – 39.5" (100.33 cm).
  • Width – 45" (114.30 cm).
  • Height – 64.9" (164.85 cm).
  • Weight – 617.4 lbs (280.05 kg).
 Speed
  • Approximately 40 ft. (12.19 m) / minute.
Minimum Radius 2"
  • Steel - (24 ga) - 100 in (254 cm).
  • Copper - 36 in (91.44 cm).
  • Aluminum - 36 in (91.44 cm).
 Electrical Requirements
  • 115 Volt, single phase, 1.0 HP AC Motor.
Material Formed
  • Steel - 29 gauge to 22 gauge (painted, galvanized, aluminized)
  • Aluminum - .019" (.48 mm) to .040" (1.02 mm)
  • Copper - 16 oz., 20 oz. 3/4 hard