1 ½" or 1" Panel Curving Machine

01607Amini
Part # 01607A

The curved 1300 system, at 1½" tall, can be brought down to a minimum radius of 36" in aluminum, or 100" in steel. This system, although rugged in design, requires a solid deck for installation, and carries the 1300 UL listing (16" width) with proper fastening.


Both the 1" and 1½" profiles can be locked with a 90° fold or a slim 180° fold. Panel widths for this application are infinitely adjustable from 12" to 28" in all metals and seam configurations. This system curves and seams panels formed on Englert roll formers (Model 1300 and Model 1301 only).

01607A
Technical Data
  • Length – 39.5" (100.33 cm).
  • Width – 45" (114.30 cm).
  • Height – 64.9" (164.85 cm).
  • Weight – 617.4 lbs (280.05 kg).
Speed
  • Approximately 40 ft. (12.19 m) / minute.
Minimum Radius 1 ½"
  • Steel - (24 ga) - 100 in (254 cm).
  • Copper - 36 in (91.44 cm).
  • Aluminum - 36 in (91.44 cm).
Minimum Radius 1"
  • Steel - (24 ga) - 60 in (152.4 cm).
  • Copper - 24 in (60.96 cm).
  • Aluminum - 24 in (60.96 cm).
Electrical Requirements
  • 115 Volt, single phase, 1.0 HP AC Motor.
Material Formed
  • Steel - 29 gauge to 22 gauge (painted, galvanized, aluminized)
  • Aluminum - .019" (.48 mm) to .040" (1.02 mm)
  • Copper - 16 oz., 20 oz. 3/4 hard