MetalMan Multi-Panel Roofing Machine

multipanel_mini
Part # 01639A
This state-of-the-art roll forming machine runs more sizes, gauges and types of material in up to ten panel configurations with minimum adjustments and less scrap. Forming rollers for each profile can be changed out by only one man in 30 minutes.

Features

  • Separate drive and form rollers, eliminates most oil canning.
  • Polyurethane drive rollers
  • Chrome plated forming roller systems.
  • Welded tubular frame
  • 13 HP Honda engine
  • Hydraulic drive system and shear are electrically activated.
  • Clip relief rollers (not included with Series2000 Panel)
  • Two pair of 1" wide adjustable flat rib rollers
  • Infinitely variable full cycle shear.

Available Options

  • 12,000 lb. capacity tandem axle trailer.
  • Dual overhead de-coiler
  • 16 inch to 20 inch expandable arbors
  • 10ft. sections of variable height run out tables (up to 50ft. mounts on machine)
  • Dual register electronic control-panel length and quantity.
  • 7.5 HP electric motor, 220V 3PH. 60 Hz.
  • Striation rollers
  • Pencil Rib Rollers (3/8" and 5/8" wide)
  • Hot melt system sealant.
  • Hand seamer: 2400/2500 - 1300/1301.
  • Electric seamer for use with A1300/A1301 or S2400/S2500 panels.

Quicklinks

metalroof
{flv}MultiPanel|sound{/flv}
Panel Image

1 ½” Snap-Lock Metal Roof System

Panel Image

1” Mechanically Seamed Metal Roof System

Panel Image

1 ½” Integral Snap-Lock Metal Roof System

Panel Image

1 3/4” Integral Snap Lock Metal Roof System

Panel Image

3” T-Seam® Mechanically Seamed Metal Roof System

Panel Image

1 ½” and 1” Curved Mechanically Seamed Metal Roof System

Panel Image

2” Curved Mechanically Seamed Metal Roof System

Panel Image

2” Mechanically Seamed Metal Roof System

Panel Image

1 ½” and 1” Curved Mechanically Seamed Metal Roof System

Panel Image

1 ¼” Integral Snap-Lock Metal Roof System

Panel Image

1” Integral Snap-Lock Metal Roof System

Panel Image

1 ½” Mechanically Seamed Metal Roof System

Technical Data
  • Length – 12 ft. (3.657 m)
  • Width – 4 ft. 5 in. (1.364 m) plus engine projection.
  • Height – 1 ft. 3 in. (38.1 cm) plus engine projection.
Panel Former on Trailer
  • Length – 17 ft. 2 in. (5.232 m)
  • Width – 7 ft. 3 in. (2.21 m)
  • Height – 6 ft. 3 in. (182.1 cm) with reel.
  • Weight – 3990 lbs. (1810 kg)
Power
  • 13 HP electric start gas engine.
Drive
  • 16 hydraulically powered chain driven cast polyurethane drive rollers.
Shear
  • Electrically activated, hydraulically powered, infinitely adjustable, full cycle.
Speed
  • Approximately 90 ft. (27.43m) / minute.
  • (Speed should be decreased 25-50% when using sealant pump depending on temperature.)
Materials Formed
  • Steel – 30 gauge to 22 gauge.  (painted, galvanized, aluminized)
  • Aluminum – .019 in. (.48mm) to .040 in. (1.02mm)
  • Copper – 16 oz. to 20 oz.