Monthly Archives: August 2013

Fact: On-site Roll Forming Machines Have More Versatility Making Metal Roofing Panels Than Factory-Based Panel Equipment

The producers of factory made standing seam metal roofing panels—people who take an order, run the panels off on a roll-forming machine in a factory building and then load them on a truck to be delivered to the place where they will be installed—have been revving up their myth-making machines about onsite roll-forming again.

The Myth? On-site roll-formers cannot make standing seam metal roof panels from 22 gauge steel and .040 aluminum.

The Fact? On-site roll-formers have been making metal roof panels from 22 and .040 gauge material for more than a decade.Portable roll forming machine producing metal roofing panel

For example, Englert’s MetalMan Multi-Panel Roofing Machine runs virtually any size and gauge, including 22 gauge steel and .040 aluminum to ten panel configurations with minimum adjustments and less scrap.  A trademark feature of this roll-forming machine is that its rollers can be changed out by only one man in 30 minutes so that a new profile can be run immediately on the job site. Englert roll-forming machines are not the only machines in the marketplace with the ability to manufacture panels on the job site. Other manufacturers of on-site roll-formers have had the capability to run panels from 22 gauge, 040 aluminum and even 16 ounce copper for just as long. If your job is specified for heavy gauge material, you can manufacture the roofing panels with an on-site roll-forming machine and have greater flexibility. Continue reading

Free Englert Roofing Mobile App Download:

Easy access to all Englert brochures and catalogs, a color selector for both roofing and gutter colors, standing seam metal roof panel profiles, and a convenient coil calculator to assist in estimating and completing your particular project.

Copyright 2018 - Englert Inc. - All rights reserved - Designed and Developed - Sitemap - Terms & Privacy