Monthly Archives: September 2014

Accurate, Complete Shop Drawings a Plus on Metal Roof and Wall Panel Projects

A shop drawing is a drawing or set of drawings produced by the contractor, supplier, manufacturer, subcontractor, or fabricator on a metal roofing or wall panel project.

It is an essential part of any project and the quality of the drawings can influence whether a project will be done correctly to specification, whether there will be legal issues down the road about meeting spec and even whether the job will be completed on schedule.

Shop drawings are not produced by architects and engineers under their contract with the owner. The shop drawing is the manufacturer’s or the contractor’s drawn version of information shown in the general contractor’s construction documents. It is drawn to explain the fabrication and/or installation of the items, in this case, metal roofing or wall panels, to the contractor’s installation crews. Unlike an architect’s drawing, a shop drawing’s primary emphasis is exclusively on the particular product or installation, unless roofing and wall panel materials must be integrated with other materials.

The shop drawings should include information for the architect to compare to the architectural specifications and drawings. The shop drawing gives the architect the opportunity to review the fabricator’s and/or installer’s version of the product, prior to fabrication. Attachment of manufacturer’s material specifications, “catalog cut sheets,” and other manufacturer’s information like independent testing results and installation instructions should accompany these drawings. Manufacturers like Englert have all of this information readily available at their company websites so it can be downloaded onto a disk or easily printed out for attachment to the drawings. Some fabricators and manufacturers will provide symbols, data, or instructions concerning installation. This can include a list of other materials, such as fasteners or adhesives, appropriate but not included for the product. Continue reading

Is Your New Standing Seam Metal Roof Warranteed? Here’s One Way to Make Sure.

Your old roof has had it. There are leaks. You’ve got cracked, curled and missing shingles.  Asphalt granules are piling up in your gutter, indicating severe roof wear. And worn-out shingles are threatening to allow water or melting snow into your attic and even into your first and second floor living spaces.

To avoid these problems and get more life out of a new roof, you’ve decided to go with a standing seam metal roof. You’ve picked your roofer, signed a contract and even made sure the contractor is getting you a manufacturer’s paint finish warrantee on your new roof’s metal material.Image of Englert standing seam metal roofing on Florida home

You believe you’ve done everything you can to make sure your new roof will perform as advertised. But wait. Are you really sure you’re getting the manufacturer’s paint finish warrantee you’ve been promised?

There’s only one way to find out. Make sure the roofer who installs your new metal roof provides you with a copy of the paint finish warranty from the roofing material manufacturer. Nearly every manufacturer of metal roofing material will provide that warranty once the material has been paid for by the contractor and if the contractor has taken the time to fill out the warranty form provided by the material manufacturer. If the contractor hasn’t done both, you may be out of luck if something goes wrong with your new metal roof.

Most manufacturers make it convenient for roofers to go online and complete the warrantee form at the manufacturer’s a website. Piece of cake. If you want total assurance this has been done, ask that the warrantee be attached to your bill before you make payment.

That way if something does go wrong you’ll have both readily available to address any issue.

Free Englert Roofing Mobile App Download:

Easy access to all Englert brochures and catalogs, a color selector for both roofing and gutter colors, standing seam metal roof panel profiles, and a convenient coil calculator to assist in estimating and completing your particular project.

Copyright 2018 - Englert Inc. - All rights reserved - Designed and Developed - Sitemap - Terms & Privacy