Tag Archives: Cinching

Metal Roofing Contractors Can Avoid Cinching AKA Friction Scratches With These Simple Rollforming Tips

Cinching, sometimes also referred to as “friction scratches” or “pickoff,” is the result of the movement or slipping of painted coil laps against each other on a rollforming machine.

This phenomenon can be frustrating to metal roofing contractors because it causes the removal of paint in the shape of small or medium sized scratches on metal roofing coil formed in the same direction of the slipping or movement of the coil laps.

Some clear signs that cinching is the cause of these short longitudinal scratches are:
•    Worn or broken pieces on the spools, idler rolls and guides,
•    Gaps or air spaces between sections of the laps of the coil
•    The ability to move the laps of coil with hand pressure, a sure sign that coil has unraveled.

Cinched metal roofing panel.The vast majority of cinching incidents are caused by improper brake pressure on the un-coiler spool or the expandable arbor brake on the rollforming machine.  For portable roll formers, the improper brake pressure on the un-coiler spool is by far the source of most cinching. And new machine operators not familiar with the use of the brake or trained incorrectly are responsible for most of the problems.

To avoid cinching, the rollforming machine operator must make sure there is proper tension to allow the coil to uncoil without tightening the laps or without loosening the coil so it does not unravel. If either of these actions occurs, the laps will rub against each other and cause cinching. Continue reading

Free Englert Roofing Mobile App Download:

Easy access to all Englert brochures and catalogs, a color selector for both roofing and gutter colors, standing seam metal roof panel profiles, and a convenient coil calculator to assist in estimating and completing your particular project.

Copyright 2018 - Englert Inc. - All rights reserved - Designed and Developed - Sitemap - Terms & Privacy