Tag Archives: Englert

Compelling Data that Supports Metal Roofs Offer Longer Service Life

New industry research shows that metal roof systems can last at least 60 years, longer than the average commercial building’s service life.

“The study provides third-party, scientific data that backs up the long held belief that 55% aluminum zinc coated steel standing seam roofing systems offer economic longevity and can be better for the environment.

Non-metal roofing systems require one or more full replacements within a typical commercial building’s 60-year service life, which is more expensive over the long run and usually adds to the solid waste stream in landfills.

The study, sponsored by the Metal Construction Association and the Zinc Aluminum Coaters Association, was conducted with oversight of three independent consulting firms which analyzed low-slope, unpainted 55% Aluminum-Zinc coated steel standing seam roofing, in a wide range of environments across the U.S.

The material tested is commercially known as Galvalume and Zincalume and is commonly used on low rise commercial buildings such as warehouses, schools, distribution centers, shopping centers, government structures, sports and exposition facilities and other structures. Continue reading

Stay Clear of These Asphalt Shingle Roof Problems with a Standing Seam Metal Roof

We all know that an Englert Kynar coated standing seam metal roof will not chip, crack, peel, chalk or fade if properly installed on your home or commercial building. And the color you’ve chosen will remain crisp decades from now.

If only the same could be said for an asphalt shingle roof. The simple fact is that because of the kind of material used in shingles, there are many more possibilities for problems.

For example, cosmetic asphalt shingle roof problems such as shadow lines, blistering, uneven surfaces and improper randomizing of shingle bundles leading to color patches on the roof—are potential problems you can face if you install a shingle roof. Continue reading

A Log Home and a Standing Seam Metal Roof: Perfect Together

There’s a reason why all the log home manufacturers feature these magnificent log “cabins” with equally sophisticated metal roofs—they know they are the best possible choice for their product both aesthetically and functionally.  Just as log homes are renowned for their natural look and low-maintenance, a standing seam metal roof system will last as long as your log home with minimal upkeep and provide the same rustic, natural architectural aesthetic as your home.

Standing seam on a log home has its practical values as well. Many log homes are built on lakes and in heavily wooded areas—often remote from the hustle and bustle of urban and suburban life. If you own such a “cabin,” odds are good you’re dealing with conditions like heavy snow, the potential threat of wildfire and remote access. Three very practical reasons your log home should be capped with a metal roof. Continue reading

End Your Flat Roof Commercial Building Snow Problems with a Retrofit Standing Seam Metal Roof

If you’re planning major renovations to a flat roof commercial building in the Northern U.S., you may want to take into consideration that flat roofs — particularly older ones — don’t handle snow accumulation very well, particularly if they have a poorly designed or blocked drainage system.

That’s particularly true on the East Coast where snow tends to be wetter and denser than the western part of the country. If your building is getting a complete makeover,  consider installing a steep slope metal retrofit roofing system that will provide a long-term solution for your snow and drainage problems. Steeper roof slopes shed snow more effectively. That’s why greater roof slopes are common on commercial and residential buildings in the northern states and in mountainous snow-prone regions. Continue reading

Custom Portable Rollformers – The World’s Best Source

Englert is the world’s leading designer of custom portable rollforming machines for the seamless gutter and metal roofing markets.

Gutter and roofing contractors from around the globe come to Englert to help design and build a variety of portable machines to meet the unique needs of their markets because of climate, rainfall or exotic greenery. Contractors from Europe, Scandinavia, South America, Africa, Australia and the Caribbean choose Englert, knowing that from design to completion they will have their machines in months–not years. Continue reading

Metal Roofing and Gutter Contractors… It Pays to be Aware of and Utilize Best Practices When it Comes to Insurance and Job Safety

We know from experience that roofing and gutter contractors of every size will find just about any way they can to save a nickel here and a dime there on every job they do.

It may be on the cost of material, or their labor, or even on the cost of gas to get a truck from customer A to customer B.

But one place they almost never look to save money is the business insurance and the premiums they pay for it to handle liability or loss of property. Continue reading

The Abc’s of Standing Seam Metal Roofing: Structural And Architectural

Standing seam metal roofing systems can be divided into two basic categories: structural and architectural.  Structural and architectural systems are designed, engineered and installed to satisfy different metal roofing requirements.

Architectural metal panel roof systems and structural metal panel roof systems are installed over a large variety of substrates. There are two general categories of substrates: continuous or closely spaced decking that provides solid support for the metal roof panel, and the other is composed of spaced structural supports (such as purlins) where the metal panels must span between supports. Most structural metal panels are used over spaced structural supports without being supported by a solid roof deck. Continue reading

Design Your Standing Seam Metal Roof for Optimal Performance in Cold Weather Climates

If you’re planning on installing a new standing seam metal roof and you live in a cold weather climate with snow, keep in mind some design considerations that, in the long run, are sure to protect you against problems with snow and ice accumulation and removal during the winter months. Here are some tips:

  • Choose a design with a cold roof. Keep the entire roof as cold as the eaves. Ventilating the underside of the roof, insulating the attic floor, and plugging air leaks are usually the answer.
  • Consider a roof color with a high solar absorption value that will help thaw snow and ice.  Colors such as bronze, brown, or dark gray versus white or light earth tones will help do the trick. Continue reading

Drip Edge: Insurance Against Those Wet Roofing Woes

Your existing shingle roof has had it and you’ve decided to replace it with a standing seam metal roof that will last twice as long and add value to your home when it comes time to sell it.

Aluminum Drip Edge from Englert is available in 4" and 6" sizes.You’ve gotten bids from two or three roofing contractors and you’re almost ready to make your decision. Most homeowners will trust their roofing contractor to do what’s necessary to replace the old roof but it doesn’t hurt to ask if your roof bid includes drip edge. A drip edge is a metal (usually aluminum) strip which extends beyond other parts of a roof and directs rainwater off the roof away from the fascia and into the gutter. The edge is configured so it prevents water from blowing under your roofing. At the same time, a lip along the edge makes water drip down out and away from your house, instead of directly down the side of the wall or fascia. In effect, it is an effective way to prevent water damage all the way from the roof to the foundation.

A drip edge provides a neat, straight edge to the roof, and is positioned so that roof water drips in the middle of gutters, along their full length. This is important because a badly positioned drip edge—or no drip edge at all– can cause overflowing of gutters, over front or back.

Sometimes, a roofing contractor will charge extra drip edge, particularly if he is hand cutting and bending the material which does take a little more work, time and skill.

But drip edge is available from manufacturers like Englert already pre-manufactured in 6” and 4” wide, 10-foot strips for new construction and retrofit roofing projects respectively to save the contractor labor costs in cutting and bending metal. Nearly every roofing contractor will vouch that drip edge is giving your home extra protection. And even home exterior painting contractors who have painted miles of fascia board with and without drip edge will tell you the paint job and wood always fair better when there’s a drip edge to help protect them.

Accurate, Complete Shop Drawings a Plus on Metal Roof and Wall Panel Projects

A shop drawing is a drawing or set of drawings produced by the contractor, supplier, manufacturer, subcontractor, or fabricator on a metal roofing or wall panel project.

It is an essential part of any project and the quality of the drawings can influence whether a project will be done correctly to specification, whether there will be legal issues down the road about meeting spec and even whether the job will be completed on schedule.

Shop drawings are not produced by architects and engineers under their contract with the owner. The shop drawing is the manufacturer’s or the contractor’s drawn version of information shown in the general contractor’s construction documents. It is drawn to explain the fabrication and/or installation of the items, in this case, metal roofing or wall panels, to the contractor’s installation crews. Unlike an architect’s drawing, a shop drawing’s primary emphasis is exclusively on the particular product or installation, unless roofing and wall panel materials must be integrated with other materials.

The shop drawings should include information for the architect to compare to the architectural specifications and drawings. The shop drawing gives the architect the opportunity to review the fabricator’s and/or installer’s version of the product, prior to fabrication. Attachment of manufacturer’s material specifications, “catalog cut sheets,” and other manufacturer’s information like independent testing results and installation instructions should accompany these drawings. Manufacturers like Englert have all of this information readily available at their company websites so it can be downloaded onto a disk or easily printed out for attachment to the drawings. Some fabricators and manufacturers will provide symbols, data, or instructions concerning installation. This can include a list of other materials, such as fasteners or adhesives, appropriate but not included for the product. Continue reading

Free Englert Roofing Mobile App Download:

Easy access to all Englert brochures and catalogs, a color selector for both roofing and gutter colors, standing seam metal roof panel profiles, and a convenient coil calculator to assist in estimating and completing your particular project.

Copyright 2018 - Englert Inc. - All rights reserved - Designed and Developed - Sitemap - Terms & Privacy