Skip to main content
FP1500/20

FP1300/20 Roof Panel Machine

The MetalMan FP1300/20 series fixed panel roofing machine runs a fixed width, variable length, single-profile 1.5 inch (38.1 mm) high x 0.5 inch (12.7mm) wide mechanically seamed panel configuration with a 20 inch (508mm) coverage.

This profile uses concealed clips and fasteners and must be mechanically seamed to qualify for the Englert weather tightness warranty.

Part # 01646PA

Get A QuoteContact an Englert support representative to get quote

Machine Technical Specs

Specs

  • Length – 123 in. (3.13m)
  • Width – 35.5 in. (.9 m) / 36.5 in. (.93 m) with rack.
  • Height – 29 in. (.75m) / 53 in. (1.35m) with rack.
  • Weight – Approximately 2,000 lbs. (907.2 kg)

Power

  • 1.5 HP electric motor 120V/20AMP.

Forming

  • 4 polyurethane drive roller stations, chain driven.

Shear

  • Easy cut rack and pinion manual hand shear.

Speed

  • Approximately 40 ft. (12.18m) per minute.

Materials Formed

  • Steel – 30 gauge to 24 gauge. (painted, galvanized, aluminized)
  • Aluminum – .019" (.48 mm) to .032" (.81 mm)
  • Copper – 16 oz

Machine Features

  • Separate drive roller systems designed to eliminate most oil canning.
  • Polyurethane drive rollers.
  • Chrome plated forming roller system.
  • Dual emergency stop switches at entry and exit ends of machine.
  • Easy to operate manual hand sheer.
  • Two pairs of 1 in. adjustable flat rib rollers.
  • One 3000 lb. capacity expandable arbor with stand.
  • Clip relief rollers.
  • Comes complete with a run out limit switch.

Machine Options

  • Dual reel rack for extra expandable arbor.
  • 10 ft. sections of variable height run out stands.
  • Hand seamer A1300 (90° or 180°)
  • Electric seamer
  • Pencil rib rollers (3/8 in. and 5/8 in. wide).
  • Striation rollers.

Contact Us

Contact Englert Today

* Mandatory fields